StarTech USB 3.In the examples below, not every display was running at 4K, but the workaround still appears very impressive.Ĭheck out the full videos below for exactly how he configured these setups. Also notable, he says he didn’t even see the Mac mini fan kick up during his testing. With his workaround, he shows the Mac mini running up to 6 displays and the MacBook Air running 5 external displays. Interestingly enough, he says the M1 Mac mini and MacBook Air he tested performed “awesome” overall under a heavy load playing YouTube videos and the highest resolution available and even using Final Cut Pro without dropping hardly any frames. You can check out a detailed walkthrough of the setup in the videos below. The workaround isn’t too complicated and involves downloading the DisplayLink software for macOS (Tulupov says works fine with Big Sur) and picking up a 4K DisplayPort to USB 3.0 adapter (and/or HDMI adapter).ĭepending on how many displays you want to run with this trick, you might need a USB-C to USB-A 3.0 adapter or a Thunderbolt or USB-C dock as well as additional cables, etc. YouTuber Ruslan Tulupov has shared two videos demonstrating the workaround he discovered (via MacRumors). You get broadcast quality 8 and 10bit high dynamic range capture in all formats up to 4K DCI at 60p, and 12bit high dynamic range capture in all. However, just like we’ve seen in the past when Mac compatibility with Apple’s Pro Display XDR was found to be broader than Apple says, it appears that M1 Macs can indeed run up to 6 external displays with good performance… at least in early testing. The new UltraStudio 4K Mini model is a portable Thunderbolt 3 capture and playback solution packed with the latest broadcast technology, including 12GSDI, HDMI 2.0 and analog connections. Connect a USB-C display: Connect the display to a Thunderbolt port on your MacBook Pro. Use a USB-C Digital AV Multiport Adapter to connect the HDMI display to a Thunderbolt / USB 4 port on your 13-inch MacBook Pro. And the Mac mini up to 1 6K at 60Hz over USB-C/Thunerbolt and 1 display up to 4K at 60Hz over HDMI. Connect an HDMI display: Plug a cable from your HDMI display directly into the HDMI port on your 14-inch or 16-inch MacBook Pro. In what looks like some exciting news, it appears Apple may be underselling the M1 Mac external display functionality.Īpple says in its tech specs the M1 MacBook Air and 13-inch MacBook only support up to 1 external display up to 6K at 60Hz. Also, if I connect the input (MacBook) directly to the system bypassing the splitter it works absolutely fine.While almost all aspects of M1 Mac performance are greatly improved compared to the Intel Mac predecessors, one notable downside has been reduced support for external displays. When I switch the input to an Xbox 360 everything works absolutely fine. Keep in mind that the input I'm using is from a MacBook Pro. However, if I connect a projector to the other output channel it stays working fine on that. However, four seconds after I connect my capture card to one of the splitter's output channels the splitter just stops outputting on that channel and essentially shuts that channel off (as seen by the LED on it). Hey so what I'm trying to do is take HDMI input (from a computer) to a splitter from which one channel goes to some viewing device (projector or something) while the other channel goes through a capture card into another system for some processing that I'm doing.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |